- Home
- Company Profile
-
Our Product
- Tablet Press
- Dies & Punches
- Manual Capsule Filling Machine
- Rotary Tablet Press
- Capsule Filling Machine Spares Parts
- Band Sealer Machine
- Fluid Bed Dryer
- Metal Detector
- High Shear Mixer
- Spares For Pharma Machinery
- Syrup Making Machine
- Multi Mill
- Octagonal Blender
- Ointment Manufacturing Plant
- Silicon Gel For Blaster Roller Cleaner
- Vibro Sifter
- Liquid Section
- Ointment Section
- Tablet Section
- Injectable Section
- Other Products
- Blogs
Tablet Press Tooling Die Punch
-
Product is not available
Country Of Origin : India
Upper punch, lower punch, die: tablet tooling made in-house in OHNS or HCHC steel, hard chrome plated to 51–60 HRC. Built to EURO and IPT standards or as special tooling, in any shape including multi-tip and Polo type. Send an enquiry with your tooling specification.
OHNS (T), AISI O1; HCHC, AISI D3
Material Options
Hard chrome plating
Surface Treatment
51–60 HRC
Hardness
Technical specifications
Tablet punches and dies made in-house: OHNS (AISI O1) or HCHC (AISI D3) steel, hard chrome plated, 51–60 HRC. EURO, IPT or special tooling; any shape incl. multi-tip and Polo type. Set: upper punch, lower punch, die. Upper tip 8–9 mm; lower tip 25–28 mm.
Key features
✓OHNS (AISI O1) or HCHC (AISI D3)
✓Hard chrome plating
✓Hardness 51–60 HRC
✓EURO, IPT and special tooling
✓Tooling types D, DB, B, BB
✓Multi-tip and Polo type available
✓Upper punch tip 8–9 mm
✓Lower punch tip 25–28 mm
✓Made in-house
Several tons of pressure on a few square millimetres forms every tablet, which is why tooling has to be hard, smooth and finished to the smallest tolerances. These punches and dies are made in-house, with careful matching of material and hardness.
Two steels are offered: OHNS (T), an oil-hardened non-shrinking tungsten steel to AISI O1, and HCHC, a high-carbon high-chromium steel to AISI D3. Surfaces are hard chrome plated, and hardness runs 51–60 HRC. Tooling follows EURO and IPT standards, or is made as special tooling in any shape, including multi-tip and Polo type.
Each set is an upper punch, a lower punch and a die. The upper punch forms the tablet's upper cavity and travels 5–6 mm into the die bore; its tip is generally 8–9 mm. The lower punch tip, 25–28 mm long, stays in the die bore and ejects the tablet. Fitting and removal are trouble-free. Request a quote for a customised tablet punch and die set.
Frequently asked questions
What steels are the punches and dies made from?
OHNS (T), an oil-hardened non-shrinking tungsten steel to AISI O1, or HCHC, a high-carbon high-chromium steel to AISI D3.
What hardness and surface treatment do they have?
51–60 HRC with hard chrome plating.
Which standards and shapes are available?
EURO and IPT standards or special tooling, in any shape including multi-tip and Polo type.
